Jump to content
  • This section of the website is for sharing software links. 
    Know of a cool piece of software that someone might want to use?

    Add it here (link to creator's website instead of adding their file)
    Only add software files if you have created them and are the owner. 
    Anyone may share a link to experiment software files here. 

    This will make it easier for people searching for experiment software - You've done most of the work for them!

    Please do not post experiment clips here. Thank you 🙂



14 files

  1. Scalar (v0.1) - Sweeping Tone Generator

    I wrote a program to generate sweeping up and down tones, with user controls. 
    What I wasn't able to do was get this code into executable form for simple installation. 😞
    So, you'll need to install Miniconda (Python 3.8, 64-bit), then go into the uncompressed directory and type
    conda env create --file scalar.yml
    Then, to run the program:
    conda activate scalar
    python ./scalar_wave.py
    The GUI should be self-explanatory.
    If you have any questions or issues, post them below.




  2. 0 comments


  3. "Rainbow People" - Python Script by Michael Lee (Varanormal Research Group)

    Information about this download can be found here: 




  4. SeaWave - Sound Emission Analyzer Wave Edition by CIBRA (LIVE Spectrograph)

    SeaWave - Sound Emission Analyzer Wave edition
    by Centro Interdisciplinare di Bioacustica e Ricerche Ambientali
    SeaWave is a light version of the SeaPro package. It is free! Developed by CIBRA and AEST, it offers most of the functions and capabilities of SeaPro; it runs up to 200kHz in all windows versions, including XP, and up to 250kHz and 384kHz in Windows Vista, Windows 7 and Windows 10 version 1703 for both real-time spectrogram visualization and continuous recording to disk. This free version has some limitations, however it can satisfy most user needs. Recording  functions are limited to single file recording with 680MB max file size. Other limitations are about the advanced settings panel for fine tuning the aspect and behaviour of the program and for saving/restoring the user configuration.
    Main Page: http://www-9.unipv.it/cibra/seawave.html 
    SeaWave Free Download Page: http://www-9.unipv.it/cibra/seawave.html
    Supplemental: Keith J. Clark used SeaWave and SeaPro from 2008 on, up until the time Sonic Visualiser began to take its place in terms of functionality. "Faces in Sound" (paranormal faces in live spectrographs) was discovered by Keith in 2007 and is a method that is still being worked with today. 




  5. Spiricam v0.81

    Use your webcam as a portal into other dimensions!
    This program supersedes Spiricam v0.74. Among fixes:
    - Color should work better. (Bug fix)
    - Arrow keys can control frame index
    - Brightness/Contrast/Gamma slides for lighting adjustments
    - Device selection pauses recording
    - Exit button removed: use top right "x" button to close program or the keys "x" or "X".
    - Magnitude clipping for suppressing bright pixels
    - Camera resolution can now be changed in "config.ini".
    Unzip the ZIP. Navigate to EXE file in the folder and double-click it to start program.
    There's also a README.txt and config.ini you can edit.
    If you any questions/comments, you can post on the Varanormal forum.




  6. Spiricam v0.74

    Unzip file. The main program is the EXE. There's also a README.txt to look at and a config.ini. Everything else is support libraries.
    In addition, check out the tutorial: Spiricam Demo.
    I have a new version coming out soon (11/8/21). Look for Spiricam 0.8. It will have:
    1) Bug fix: improved color
    2) Options in the config.ini to specify camera resolution, display resolution, and workspace resolution
    3) A new lighting contrast option (Gamma)
    4) Arrow keys to control frame slider
    5) Auto-stop, if camera selection changes during recording.
    6) A new subtle option for filtering.




  7. Noise_Gen_100.rar Program - Variable Bandwidth Noise Generator (hosted by radioscanner.ru)

    Program - Variable Bandwidth Noise Generator by "Programmatic" Hosted by radioscanner.ru
    Author: "Programmatic"
    Variable Bandwidth Noise Generator 1.0.0.
    Useful for measuring signal to noise ratio.
    The archive contains the complete source code for Delphi 3-7.
    Original Link: http://www.radioscanner.ru/files/miscsoftware/file10919/
    Original Filename: noise_gen_100.rar
    Uploaded 8 Sep 2010
    Google Translation of this original page on Russian Site: HERE
    Supplemental: Keith J. Clark has been using this program since about 2015 to generate white noise to feed into a variety of experiments. It is ideal because it is small, compact, and allows the user to select which output device to use - which is crucial to experimenting with virtual audio cables. To see a sample of how noisegen could work in an experiment, see video below.
    HINT: Just feed the noisegen directly into some noise reduction plugins!
    As of 11/6/20 The program author "programmatic" has provided permission to host this file directly on this site for FREE download. 




  8. sTile - Create Psychedlic Images That Tile (Are Repeatable) by Harmwave.com

    Hosted at Harmware.net

    This version - 3.0, 2015 - will likely be the last unless I discover glaring program logic errors.

    I added options to the multi-gradient design dialog that allow more precise positioning and selectable orientation.
    When drawing ovals and rectangles, you can choose to have it centered on the image.
    You can be more precise when cropping.
    The multi-color gradient layout is stored in the ini file, so it remembers and re-loads it between sessions.
    A bug fix or two.
    READ MORE: http://harmware.net/index.html
    Samples of patterns used in the thumbnail for this download are courtesy of harmware.net 

    Supplemental by Keith J. Clark: This software is about on par, or perhaps a little more difficult than the Perlin noise software we have used such as Spektrocom. Still, there were a few examples from 2016 where it became evident that if the energy of the experimenter is strong enough, faces can form in the random pixel generation. 
    Experiment Samples Below:




  9. Spektrocom - FREE Paranormal ITC Software by eXtremeSenses Software (LIVE Perlin Noise)

    Introduction by Keith J. Clark:
    For many years people have succeeded in conducting visual paranormal experiments.  For those of us in a much smaller niche, we refer to these as “ITC (Instrumental Transcommunication) Experiments”.   Traditionally these experiments involve non-digital visual methods such as fog, steam, smoke, dry ice, vapor, etc.  Photographs, when taken using these mediums, often appear to show paranormal faces.
    In February of 2019, a new experiment was run by iDigitalMedium in an attempt to synthesize the ideal experiment conditions inside a computer. It streamed live online 24 hours a day. Paranormal faces were appearing in computer-generated pseudo-random white noise. All of this was happening within the internal components of the computer workstation; there was no external input. This experiment was called “Faces in Sound.”
    For a year, I began to focus my energy on the computer experiment, and as a result, at times, the clarity of paranormal faces improved. A direct relationship was experienced and confirmed between my mental focus and the “energy” contact field – which expressed itself in the physical hardware. It was the first time that I had achieved consistent results using nothing but internal computer software and hardware (experiments usually involved radio signals in the past). At this point, experiment environments became “synthesized”, and the goal was to continue to demonstrate this concept to the general public.
     There are many software solutions for computers with Windows operating systems that have used for paranormal experiments, often with less than impressive results. These experiments included “contoli noise”, “sTiles”, and other programs intended to generate random computer video pixels.
    In February of 2020, Martin Bellefeuille offered to donate his Software entitled “Spektrocom” software to Metascience Foundation and the efforts of paranormal and ITC experimenters around the world. We graciously accepted. Since then, Spektrocom has been featured on iDigitalMedium's\Metascience Foundation's YouTube LIVE 24-hour stream under the heading “Faces in Software.”
    Martin accomplished a few requested tweaks of his Software, and we now host it here; download for FREE with no support. The goal is to encourage people to conduct long-term experiments to see if they have what it takes to help people in spirit form their faces – in Software!
    FREE SPEKTROCOM SOFTWARE by eXtremeSenses Software
    History: To read the original article when the Software was first envisioned and developed, visit our friends at ITCVoices.Org
    Classified as an Instrumental Trans-Communication (ITC) software by eXtremeSenses Software. Spektrocom is a software for Windows that uses the advanced Perlin noise algorithm to help the spirits manifest themselves visually. The modified Perlin noise implemented in Spektrocom gives impressive results for anyone interested in ITC imaging research.
    Initially released in 2016, the Special Edition was changed from the original version to become free Software (without any technical support/updates from eXtremeSenses Software) for the use of  MetaScience Foundation\iDigitalMedium and researchers in the field.
    Features for this FREE Software:
    – Real-time generation of images in full screen or window mode
    – Can automatically save images
    – Image noise adjustments during a live session
    – Uses a custom-designed Perlin noise algorithm
    – Two sound bank options! SpiriTron (from iDidigitalMedium) or use your custom bank!
    – Audio effects/tuning: reverb, echo, tempo, rate and pitch
    Note: Sound playback and the Perlin noise generation are not linked together.
    You need the following requirements for your computer:
    Windows 7, 8.1 or Windows 10 Home or Pro (Windows 10 ‘S’ mode is NOT supported) Intel (i3 or higher) CPU (Processor) – Quad-Core 1.6Ghz 2 GB of RAM (memory) or higher Resolution: Min. 1366×768 / Max. 1920 X 1080 Sound card Tablet mode in Windows 10 is NOT supported Administrator permission is required for the installation *********************************************************************************************************************************
    (you will need to unzip the download before running the install executable)
    Supplemental Notes by Keith J. Clark: Due to individual perception results of this software may vary. In my experience of using this software over the least year, paranormal pictures can and do appear while using this software in an experiment setting. I've found it works best when combined with a free program such as OBS (Open Broadcaster Software) and a custom pack of contrast, exposure, and blur filters. This is because the formation is viewed too close up, and the specifics of paranormal faces are missed in the details. It is recommended to not experiment in full screen unless you are at least 10-20 feet away from the screen. 




  10. Sonic Visualiser - Open Source (LIVE Spectrograph) by Centre for Digital Music at Queen Mary, University of London

    Sonic Visualiser is a free, open-source application for Windows, Linux, and Mac, designed to be the first program you reach for when want to study a music recording closely. It's designed for musicologists, archivists, signal-processing researchers, and anyone else looking for a friendly way to look at what lies inside the audio file.
    Sonic Visualiser version 4.2 was released on 14th August 2020. Download it here!
    Sonic Visualiser is one of a family of four applications from the Centre for Digital Music:
    Sonic Visualiser itself is the most general, a program for highly configurable detailed visualisation, analysis, and annotation of audio recordings. Sonic Lineup is for rapid visualisation of multiple audio files containing versions of the same source material, such as performances from the same score, or different takes of an instrumental part. Tony is for high quality pitch and note transcription for scientific applications, designed primarily for solo vocal recordings. Sonic Annotator is a non-interactive command-line program application for batch audio feature extraction, using the same feature extraction plugins as Sonic Visualiser. READ MORE: https://www.sonicvisualiser.org/
    Supplemental: Keith J Clark has been using this software since at least December of 2018 for live spectrograph images using sound. Demonstrated in the following videos:




  11. EVPMaker 2.5 Generation of Acoustic Raw Material Using The Means of Random Controlled Phoneme Synthesis evpminst.exe

    The following file is made available for download as a means of preserving its historical significance.
    In accordance with the author's expression of copyright and distribution, this file is made available for free, in its original form. 
    The author is no longer active in the community and requests complete and total privacy so we will refer to the author as "S.B."
    Please do not make attempts to contact the author. 
    1 .  W h a t  i s  E V P m a k e r ?
    EVPmaker is an experimental program for the generation of acoustic "raw material" for recordings of "tape voices", also known as "Electronic Voice Phenomena" (EVP), using the means of random controlled phoneme synthesis. EVP are recordings of utterances upon sound recording media (recorder tapes, cassettes, video tapes, etc.) which are physically unexplainable. These voices are often reasonable messages replying to corresponding questions, or they are referring to circumstances concerning the experimenter.
    More information about this topic can be found on the Web site of VTF, the German Association For Trans-communication Research (http://www.vtf.de/) or AA-EVP, the American Association Electronic Voice Phenomena (http://aaevp.com/).  (Note: now at: https://atransc.org/)
    To generate the "raw material", EVPmaker uses a method called random controlled phoneme synthesis. In the simplest case, an audio file is being subdivided into short segments which then is played back in randomly order. With the use of a suitable sound editor with "cue list" feature, also "real" phonemes can be created and used in EVPmaker. These phonemes can then be logged during the random controlled playback together with their phonetic subscription symbols, so if you hear an EVP, you can also read its phonetic transcription.
    Moreover, EVPmaker offers the possibility to record "EVP Sessions". An EVP session can consist of any number of individual EVP. Each EVP is automatically provided with the current date and time. For each EVP a question and an interpretation can be entered. EVP sessions can be saved to disk and loaded again later. The raw material sequence of each EVP can be repeated as often as you wish, it can be saved as a WAV file, or it can be loaded into an sound editor where it can be processed or examined in any way. Every single raw material segment, from which the randomly generated sequence has been composed of, is stored in a "cue list". If the sound editor is able to display such a cue list, then these segments can be addressed and played back directly. In this way
    you can examine exactly, from which fragments a voice is composed of.
    4 .  C o p y r i g h t
    EVPmaker has not been written in commercial interests, but for fun of
    programming and for scientific curiosity. Therefore, I don't want any
    money or other material returns for EVPmaker; thus the software is
    distributed as "Freeware". Nevertheless, I reserve all rights for this
    program, EVPmaker is Copyright © by S.B.   (Name abbreviated to respect privacy of author)
    The idea on which the program is based - the generation of raw material
    for EVP recordings by random controlled assembling and playback of
    individual segments of an audio signal - is common knowledge and as such
    not subject to copyright.
    6 .  D i s t r i b u t i o n
    The program may only be distributed or made accessible to the public in
    its complete and unchanged form, along with the manual. Concretely this
    means that only the unchanged installation file evpminst.exe may be
    passed on.




  12. "Spiral ITC" Standalone HMTL\Javascript by Andres Ramos (Varanormal Research Team)

    Author: Andres Ramos (Varanormal research Team)
    This application is used to enable spirit image generation by use of random numbers and a certain transformation algorithm. The images are very faint and need a lot of interpretation. I recommend to use post processing with a suitable image editor. Actually this app still is not optimized and i need to try different transformation algorithms that might give better results in the future. However I think it can be useful to start with something in the realm of spirit imaging.
    INSTRUCTIONS: Unzip the archive. The app is a HTML5/javascript application. Open index.html in Chrome or Firefox. It contains also a manual for using the app.
    This application was a try to enable spirit image manifestation by use of calculated random numbers and feedback algorithms with the image content rendered in the shape of a spiral to the canvas. There are lots of parameters to play around with and a manual is included. The app is written in HTML5 and javascript. Thus it runs in most browsers and operating systems. For some reasons it doesn't run on smartphones so far.
    The app currently is not very satisfying in my eyes since the spirit faces are very faint. Some post processing with a good image editor could be useful. However the image often show lots of hidden structures that are not faces but something different. At least you can give it a try and maybe have some fun while playing around with the parameters
    Suggested Settings by Keith Clark below:
    Samples of Faces when used with the FREE Software OBS (Open Broadcaster Studio) in combination with exposure, contrast, and blur filters:
    TUTORIALS ON USING "SPIRALITC" In Combination With OBS will be provided by Keith Clark when time allows.




  13. "Sample7" Spiricom 7 Vocal Tract Simulator One Minute by Keith Clark (Varanormal Research Team)

    In January of 2020 this file was created using the program called "VT Demo" from University College of London.
    The purpose was to continue experiments that used the raw components of human speech (without containing any information). We do this by simulating ways to create the necessary vocal energy conducive in an experiment environment for non-physical personalities to use for voice formation. 
    File was generated by Keith, sample 7 of a series happened to be the most productive during experiments. 
    Included below is a .mp3 version as well as a .wav file that can be opened in programs such as EVPMaker. 
    To hear what it sounds like in an experiment environment, a sample can be listened to in one of the attached files below.
    To hear this live stream in action (while it is available), Visit our Streams and look for "STREAM 3 - Spiricom 7"
    ucl esystem sample7 vocal LOWER-ONEMINUTE.wav ucl esystem sample7 vocal LOWER-ONEMINUTE.mp3 2-Jan29 2020 Spiricom7 qna FULL - sample-no interpretation.mp3




  14. "Amorphous Field Gui" Python Standalone Executable by Michael Lee (Varanormal Research Team)

    This program generates a constantly changing noise pattern based on a pseudo random number generator (PRNG). Scientifically speaking, PRNGs should not be able to be influenced by spirits, but there are two caveats. One is that the random seed used in Python is somehow affected (like timing). The other is that this may be an example of a partnership between our medium-capable suggestive minds and randomly generated shapes and forms. 
    At some point, we will also introduce random visuals that derive from hardware sources, like the audio input of your computer. It will be interesting to see if the images improve. 
    Download Program (The compiled program runs only in Windows 10.)
    Amorphous Field Zip File
    Click the link. Then click the down arrow button at the top right to download. Unzip the file (uncompressed over 700 MB!) and it will produce a folder. In this folder is an EXE file called amorphous.gui.exe that you can run.
    Source Code (Python; Any OS)
    If you have Python / Anaconda3, you can play with and modify the script. Let us know if there is a more efficient way to make an EXE from Python, or if you want, you can recode the program in another programming language.


    1 comment


  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.