Andres Ramos

Thanks for your motivation Jeff and please don't worry. This is just a setback with one technique and nothing in general. I'm glad I found out the issue before going public with this technique. Just need to rewrite a part of my coherer paper because I was referring to the water cell. This is why it is so important to adopt at least a basic scientific method in ITC and to maintain a reasonable share of self criticism. Failing is not a shame as long as you find out and acknowledge it. Now I know at least the water cell has no ITC potential. On the other hand I obviously got very good results from the parasitic graphite coherer. Thus I will replace the water cell by loosely touching graphite rods today and try to replicate my results from last week. I'll never stop my research in ITC!

I think I found out and the result is a big slap in the face! As I said I had temporarily repaired one of the broken rods by pushing it tight fit into the cork where the other piece of the rod sticked into. This resulted in a fragile electrical connection generating a Coherer effect. I proved this by bridging both of the new rods with a third one placed loosely on the other two ones. Immediately I got the same signal I had last week. The crack in the rod was hidden because it was in the part of the rod going through the cork and thus not visible. I suspect it was there from the very beginning. Thus all my results with it are a fake. The conclusion is, there is no water coherer effect! It's a delusion! The signal is coming from loosely connected graphite. It's a simple graphite coherer and nothing more. However it gave very good signals. So please don't waste your time replicating this circuit. There is no ITC in it!

Something strange happened today. I finished the prototype according to the latest schematic posted here. I really was wondering that it took me an immense amount of effort to get the job done because of tremendous stupid errors I had made during soldering the electronic. Similar errors I just made the last time when I was a kid. It took me hours to beat the crap out of the device. Finally the electronic worked fine but then suddenly the noise signal from the cell ripped off. I double and triple checked everything. Found nothing, the electronic worked as expected. I knew that one of the rods was broken and only was temporarily repaired by me. Thus I completely exchanged the rods and added a brand new cabling. Now noise!. Then I changed the water and added fresh alum. No Noise! Finally I could'nt go on anymore because a feeling of terrible exhaustion came over me. I just can say that electrically everyhing is alright but the cell noising effect seems to be just gone! Could a be that a door got slammed before my very eyes?

Wow Jim, you seem to act pretty cool in dealing with those disturbing events. I will take a closer look to your pictures later. Do you know something about the history of your house? Moreover you mentioned that your friends are facing similar incidents in the same timeframes you are facing. If you would maintain a log of incidents maybe one could derive some astrological rules from the data. I am considering the same because I am facing incidents mainly in April/May.

OK, I just finished my alpha tests with the new receiver design. After some changes and tweaks it now works like I intended it to do. Just functional tests so far but the signal reading is good and my noise gate stage now works very smoothly, better than with the SSM2176 circuit. This is the new schematic: The interactions between the different stages are now well balanced. As promised I added some technical parameters to the schematic about the water cell to make replications easier. Sorry I needed to kick out the AF transformer. It turned out that the noise gate workes better without transformer, just with resistors. Moreover now the component list became easier. The signal looks VERY good and has nice instabilities and polarity shifts. I really love it. This weekend I will build up the new electronic according to the scheme above and customize the front panel. If everythings works as expected the receiver will be ready for streaming around sunday. Keith reserved a relay stream for me.

Thanks Gizmo for your comments and the papers you provided. I agree with your descriptions about what is going on. I just can say that something is brewing. What we are experiencing is not "normal" in it's essential meaning and we are persistently shifted towards some other reality that might drop into our life's in small pieces or with an upcoming big bang, i don't know. I will read what you shared because I believe that also those strange storylines are entangled and are leading us to somewhere.

Thank you Karyn for your comment. I heard and read about the multiple facets of the inner self in the past years but I can't remember having had any own experience in this. So, it is the first time for me I encounter this phenomenon by myself. Probably we are collecting and re-integrating our fragments slowly.

This is fascinating. In a way your future "me" is showing yourself a part of the spiritual plan you committed yourself to and then it really happens!

Thanks for the paper GIZMO. I will read it and coming back to you. In fact I never dealt much with the UfO phenomenon. I was mesmerized by it in my childhood from watching movies like Spielberg#s "Close encounters of the third kind" and of course XFiles. However this was more a technical fascination and I was asking myself if evolution really made another species grow on another planet that managed to construct spaceships travelling faster than light. As I started my spiritual journey these thoughts slowly vanished. However since 2 years I more and more see that both "worldviews" have much in common. One of my ITC colleagues wrote something about the mission of Jesus and he described parts of the spiritual worlds and what is going on there. In this view the existence of other races is normal. They are just spirits who decided to incarnate in a different form. Thus basically aliens are a reality for me, another one like ours here of course.

Forgot to say there is a small error in the schematic I have fixed already. R5 is not any more directly connected to R3/C1 because the DC coupling together with the offset voltage of the op-amp shifts the bias away from the middle. I know disconnected R1 from C1/R3 and implemented another 22uF capacitor from R1 to GND

Thanks Michael. In my impression I see a mirrored self of everyone of us on the other side. I have spiritual companion here in germany, his name is Alfred. He is deeply connected with the astral plane since long and part of a group that is half here and half in the hereafter. Every member has his reflected equivalent on the other side. And you are right, it is crazy! Please be aware you have your share in my work. I tried denoising and in the signal parts dominated by impulses also paulstretching and it worked but gave me no outstanding results. But with your ML the results are really great! Appears to me as if two compatible qualities have found each other finally. We'll see if I can improve the hardware a bit and can find out the ideal preset for your ML and the water cell. Still lots of tests to do.

There are really some similarities we share referring to our dream experiences. The phenomenon of a fragmented self shows up in both cases and also that they are interacting in some ways. The second point is that you told that your observing self is able to control the dream up to some degree. In my dreams i had the same experience as if I was constructing the story of the dream while I was dreaming. Sometimes, when things became too weird I changed the story.

Referring to your question of adding minerals. Currently I am operating the cell with demineralized water an adding a tiny bit of Alum just to give it a try. Here a whole realm of new possibilities is opening up by using different chemicals in different concentrations or even mixing. The possibilities are literally limitless!

Thank's Jeff for your kind comments. See the schematic below but please be aware it is preliminary since I already identified some flaws. The preamplifier gain is not well balanced to match the required leveling for the noise gating (the two diodes). I need a little more gain of roughly 10dB I guess. Then I want to kick out the af-transformer because they are rare and expensive. Another thing is the noise gating itself. The more I turn up the gate the less the output amplitude becomes. This is normal. I want to modify the last op amp in a way that noise gate and amplifier are both operated with one stereo poti. Thus I can compensate the amplitude loss by more amplification. Odeally I can turn up the gating and the signal level at the output stays the same.. I already have a modified schematic but won't be able to realize a new setup until next weekend.

I never contacted him but it is actually a good idea. In the past I made experiments with a very susceptible array of phototransistors and I scrutinized all sources of light starting from monitors, tv-sets, lamps, neon signs, car head lamps, advertising signs and even the light of the moon. I was looking for hidden modulations and I got some very interesting results. I also made a recording of a candle flame and it gave a very smooth hissing sound. Let me look, maybe I can find the audios. It's many years ago I made them.

Really great! Thanks Karyn!

My new water cell ITC receiver is in progress. First test runs have taken place today. Everything is contained in an aluminum casing. The water cell is in the upper right vorner in an own compartment. Need to add some foam on the ground to prevent microphonic effects. Test with Michael Lee's ML were amazing! I got a hundred messages from roughly 10 minutes recording material and there is even more in it but for some english messages I couldn't find a meaning. Even though I still want to improve the gain and noise gating in the device. I got speech on a regular base from the ML. Most messages in german, some in english an some mixed. One weird thing occurred. Some messages were coming from an entity saying he was me! Maybe I got in contact with one of my self fragments. "Bin Andrés" -> "I am Andrés": Bin Andres.mp3 "Andrés heisse" -> "My name is Andrés": Andrés heisse.mp3 "Andrés Agent ist" -> "Andrés is agent":Andres Agent ist.mp3 "Andrés saß in Liebe" -> "Andrés was embedded in love": Andres saß in Liebe.mp3 "Du einst zwei Personen" -> "You are two persons": Du einst zwei Person.mp3 "Keith is happy": Keith is happy.mp3 "Part is demon": Parts is demon.mp3 "Who sell it": Who sell it.mp3 Then I got some messages where they reflected my water cell setup. "Wasser stützt" -> "Water is supporting": Wasser stützt.mp3 "Wasser schiesst" -> "Water is shooting": Wasser schiesst.mp3 "Wasser hört" -> "Water is listening": Wasser hört.mp3 "This is Sam Weiss" (Maybe the hobbit? I don't know): This is Sam Weiss.mp3 "Sorry brother": Sorry brother.mp3 "Space are us": Space are us.mp3 "Suchst die andere" -> "You are looking for the other one":Suchst die andere.mp3 "Jetzt hört die Maniston" -> "Now Manniston is listening":Jetzt hört die Manniston.mp3 Bin Andres.mp3 Andres saß in Liebe.mp3 Du einst zwei Person.mp3 Keith is happy.mp3 Parts is demon.mp3 Who sell it.mp3 Wasser stützt.mp3 Wasser schiesst.mp3 Wasser hört.mp3 This is Sam Weiss.mp3 Sorry brother.mp3 Space are us.mp3 Suchst die andere.mp3

Thank you Jeff! Now I have enough to read when I am retired.

Wow thank you so much Gizmo! I know the books from Seth he wrote through Mary. I read the one about diseases. Thank you so much!

This is really very much appreciated Jeff! Would you agree if I put these documents here in the respective forum section or are there copyright issues?

Excellent Jeff! You are a great source of very rare informations.

I must read this thoroughly when I have more time because it's thrilling Jeff! Michael Lee and I had some discussion about the use of photo diode dark currents for ITC, so your article starts making bells ringing in my mind. Could you please provide the book for me?

Yes, I know all of his projects. He's a genius in my eyes.

I found this interesting setup on the site of Nyle Steiner www.sparkbangbuzz.com. He described an evaporograph, a device that produces images from condensed water. I ask myself if this could be used for visual ITC. evaporograph

Wavepad is cool. I have it on my smartphone too. The amazing point in Wagners setup is the lacking of noise. Even the voices are not very legible I never got such strong spirit signals without noise.