I use a microphone for recording spirit voices that works very well.

It contains a standard electret condenser microphone capsule and an adjustable preamplifier.

I have the idea of making two of them each feeding one channel of a stereo signal. The question is, if we would operate both microphones with some background noise close together, will we get the same voices on both channels?

Yes you are right Jeff. As I read my reply to your comments I became aware that I oversaw the importance of spectral material to form for the spirits. You now have a very valuable theory at hand.

Thank you Jeff! So great to read your technical comments and evaluation here. That makes me think a lot too and you opened a new perspective to me. If I got you right then the main source of the pk- modulation could be the SSM2167. I supposed the same but as I wrote I was unsure if the pk-modulation comes from itself or if it just amplifies the pk from the phototransistor.

What you are suggesting is that the non-linear transfer characteristic of the SSM2167 is the motor for the pk-effect but the varying amplitude level of the noise signal from the phototransistor is the fuel.

This is a new perspective because I always saw the phototransistor as an entropy source, which it actually is, but the point could rather be the varying amplitude and not the entropy in first line.

I observed what you described with strong pk-effects coming from the scratching sounds of turned potentiometers. Last year this was the reason why I made experiments with a rotating graphite drum and electrodes touching it.

This morning I analyzed the signal from the SkySound receiver again. I elevated the inclination a bit and wanted to investigate the change in the signal. I heard, like in the recordings before, that there is a layer of strong impulses above the noise with varying distances, but not much varying in total, and I could hear that the voices were forming along with these impulses. It seems like every time an impulse raises, a small fragment of an allophone comes through much like in a sampling process. This is supporting your hypothesis of varying amplitudes, what impulses actually are, and the non-linearity of the receiver.

If we push your thoughts further it could be possible to gain spirit voices from trains of impulses (the good old NE555) and an SSM2167 without using entropy at all? This could be a game changer, Jeff!

10 hours ago, Karyn said:

Awesome work there Andres.  I have not read all of it as of yet, thank you for the wonderful detail you go into, to make this a viable outcome for the future.

Thank you Karyn. I really appreciate your support. I know the article became very long. Originally I wrote it in Google docs as a technical research paper to be published externally (e.g. at Anabelas ITC journal or somewhere else). However, as I described, during the work on the experiments I observed the focus shifting away from skylight to any form of light and I became unsure if this unclear focus would affect the paper's acceptance potential.

So I decided to publish it here at first as an experiment with ongoing research.

Abstract

I am an electronic engineer by profession and involved in instrumental transcommunication for three years. In the past 10 years I did some experiments with light. Specifically I was investigating different light sources for modulations that could be made audible by a simple setup made of a phototransistor and an amplifier. By the end of the year 2021 I decided to repeat those investigations upon the light coming from the sky, especially at dawn and at night (looking for possibly very low light intensities).

This report describes a series of experiments I did with different sources of light and my quest to identify the potential for psycho-kinetic modulation in it.

Introduction

Modulated light was always fascinating to me. The first experiments I started as a young boy when I discovered that ambient light contains hidden information, by just using a light dependent resistor and a simple transistor. My first encounter was the power line hum imprinted in every light source we use. However, very quickly I found out that TV-screens, monitors, control lamps, remote control LED’s and much more were emitting all sorts of different and often complex modulation patterns. In 2010 I designed the best modulated light receiver I had made so far. It found a place behind the windshield of my car and I drove around to sample as many audio recordings as I could. This way I recorded the sounds of head lights, street lamps, neon lamps, signs a.s.o. You can find some examples in the following.

 

Table 1: Examples for modulated light

 

It was at that time already when I first encountered a phenomenon I could not explain. It was an audible anomaly catched at a moment when no visible source of artificial light was around while I was driving down a country road at dawn.

Hear this:

 

This sound appeared to me like a bypassing U.F.O and  I couldn’t make any sense from it. As I said, back in that time I was not involved yet in the investigation of paranormal phenomena.

In the following chapter I will describe the circuit I used for my latest experiments in detail.

 

The SkySound light receiver

 I named the device “SkySound” because I deliberately designed it for the investigation of light emissions coming from the sky. Paranormal phenomena and spirit voices gained in instrumental transcommunication are merely observed at night, so it was logical to create a device that could pick up those faint modulations also, if present at all.

The standard approach for receiving light with electronic components is the phototransistor. Basically this is a standard transistor with a transparent case. That way not only small electrical currents going into the base (control electrode) of the transistor are amplified but also light shining on the transistor substrate. These components are cheap, sensitive and easy to handle.

Fig.1: VT9112 phototransistor

 

In my experiments I used the VTT9112 phototransistor because I dragged a bunch of them from the trash can in the company I worked for, 20 years ago.

The following image shows the electronic circuit that will be explained in detail. If you are not interested in the electronic functions of this device you can skip this chapter safely. You don’t need to know the inner details to follow my descriptions of the anomaly itself in the later chapters.

 

Fig.2: SkySound electronic schematic

The transistor marked as “T1” is the VTT9112 I already described. Instead of the classical load resistor in the emitter path I provided a special circuit made of T2/R1/R2/C9. This is a self-adjusting load that always holds the dc bias in the middle between the power supply voltage and ground to provide always the best output swing for T1. Moreover, it works as a high impedance load for T1 and thus ensures maximum output. Transistors T3 and T4 are used as standard emitter amplifier stages. They are pushing the amplitude level high enough for the circuit IC1 to work with. This circuit is an integrated preamplifier originally designed to pre-process microphone signals. It provides a compressor to limit signal overdrive and a noise gate. The noise gate is a circuit that suppresses signals below a certain threshold and amplifies everything above the threshold. In practice this is not a hard threshold. Moreover, the transmission characteristic is non-linear and, if carefully adjusted, can boost small fluctuations in the noise signal, exactly where the spirit voices are hiding. So in easy words, the noise gate is utilized to increase the so-called “psycho-kinesis modulation” (pk-modulation). However, I found out that this function requires very careful adjusted input levels. The pk-modulations in the signal output is enhanced slightly but the signal quality is not. Obviously the spectral compositions of the signal deteriorated slightly by using noise gating. The use of this feature is up to deeper scrutinization. The other components are used for the power supply of the circuits.

As I already said, my intention was to pick-up rather low intensities of light at night. Nevertheless, after my first tests I found out that the receiver should also be capable of handling bright light. the result was the above-described self-adjusting load.

The phototransistor has a very small area that is susceptible to light. To make it more susceptible without just raising the background noise the transistor generates, the optically susceptible area must be enlarged. Classical approaches are lenses or mirrors. I decided to build a small reflector funnel that directs every beam of light, entering the opening of the funnel, to the transistor.

Fig. 3: The reflector funnel

I made the funnel from cardboard that is quite rigid and easy to cut. In total I made 4 triangular shaped planes, covered with reflecting foil and glued them together. At the bottom of the funnel I placed the electronic circuit with the phototransistor “looking” directly into the funnel. The opening of the funnel covers an area of 0.01 m2. Thus the optical area of the transistor of 1.96 10-5  m2 theoretically is enlarged by the factor 509. In practice this factor will be lower due to inevitable reflection losses. 

The casing for the electronic circuit was realized by pieces of double sided copper plated PCB material, soldered together. This way I obtained an optimal double shielding against electromagnetic interference.

Fig. 4: The completed SkySound receiver

I made a simple stand from wood with a joint to adjust the inclination of the receiver that looks much like the feeding horn of a satellite LNB receiver. The foot of the stand contained a magnet, so I could attach the whole receiver easily to a metal plate on the window sill.

I placed the receiver in my attic where it overlooks the surrounding area from a height of 12m. The inclination angle against the horizon is almost zero, making the receiver looking at the lower sky roughly at horizon level.

I connected the receiver to my Windows-10 Notebook with WIFI connection to my home router and used the application “butt” to stream the signal to the varanormal shoutcast server where it was relayed back as “Stream 4” which is reserved for my experiments.

 

Investigation results

I started my investigations by the end of 2021 and they are still ongoing. In the previous chapter I already described some of the  experiment parameters that I want to list here.

 

Table 2: list of experiment parameters

 

General observations

I quickly observed some general characteristics of the received signals and the properties of the receiver. Basically the signal was very low at night and very strong at day. This is no surprise because more light causes more current and more current causes more noise in the transistor. This is a rule of thumb in the world of physics. The question is if there would be an additional amount of noise coming from the quality of the light from the sky and not its quantity. We keep this consideration aside for the moment.

In any case, the light caused huge signal level changes during sunset and sunrise that were remarkable.

Fig.5: Signal level increase at sunrise from february 06-02-2022 (dd-mm-yyyy)

At the time I was doing my investigations the sun was rising around 07:45 CET (06:45 UTC). You can see very clearly the non-linear “trumpet” shaped signal rise taking place over a time period of 6 minutes.

Fig.5: Signal level decrease at sunset from february 06-02-2022 (dd-mm-yyyy)

 

Sunset these days is around 17:45 CET (16:45 UTC). More or less you can see the sunrise characteristic going backwards in the image above.  The shape of the signal is not as beautiful as the “trumpet” at sunrise. You must take into account that clouds passing by and all kinds of precipitation are overmodulating the light from the sun.

I recorded and post processed the signals. What I found out was that especially at those transitional periods around dawn the signal contained a lot of spirit voices. At broad daylight there was heavy noise but low pk modulation and at night the signal level was too low for a reasonable signal gain.

For the post processing I used Wavepad (NCH). My standard procedures for signal processing were

• Adding reverb (500ms decay time, 75ms predelay, 50% diffusion, 0dB wet signal gain, -6dB dry signal gain)
• -3 dB multiband noise gating
• 20% auto spectral subtraction
• signal normalization

I exported  some audio samples, processed with the methods listed above. Of course interpretation of the content of spirit messages is always subjective. Moreover every ITC researcher develops a kind of clairaudience based on the methods she or he is using. The result is that others often can not hear what she or he hears. If the evaluated samples do not have Class A quality they are often interpreted as pareidolia. Thus I won’t blame anyone for evaluating the following examples  this way.   

In order not to influence the reader's perception I provided my interpretation of the samples in a table to be found in the annex of this document. I just want to say that I identified the language as German.

 

Table 3: List of exported audio samples from initial  SkySound sessions

The Stream 4_13 event

At February 12, 2022 I was still lying in bed in the morning. It was Saturday and the sunrise had started around 07:45. At 08:17 I decided to switch on the streaming audio app “MR” on my smartphone and recorded the SkySound signal while listening to it with closed eyes. The recording app “MR” named it “Stream4_13”. After 11 seconds I suddenly heard strong bursts breaking through the noise. First it just appeared to me like a periodic interfering signal but then I recognized voice fragments  stronger than I ever heard them directly in noise.

Fig.6: Envelope of raw signal at the Stream 4_13 event

After 8 minutes I stopped the recording and listened to the signal I had picked up. It was full of weird sounding voice breakthroughs. Post-processing of this signal was easily done because of the superior pk-modulation. I applied spectral subtraction based on a noise sample and what came out is visible on the next image.

Fig.6: Envelope of  processed signal at the Stream 4_13 event

This processed audio contained surprisingly loud and partially clear messages overlayed by humming sounds.

 

Table 4: Stream 4_13 recordings

 

I leave it up to the reader to make up his own mind upon the results. I evaluated them as most amazing.

The interpretation of the voice contents gave me the impression that the spirits had tried something to surprise me or they did something that even surprised themselves. I am not sure about this.

Investigation of other light sources

At the beginning of the previous chapter I already pointed out the question if the received noise is more a function of the light quantity coming from the sky or, at least partially, also a result of the quality, namely the spectral composition, of the light itself.

It is always good to have something to compare your results against to draw further conclusions. So I decided to stimulate the phototransistor with other light sources and to see what comes out. I replicated the SkySound circuit on a breadboard and attached different LED’s to the phototransistor that could be regulated in terms of their light intensity.

My first goal was to find out if different LED’s are producing different light intensities and noise characteristics under the same conditions. So I concluded I must operate the LED’s in a way that they are supplied with the same amount of power to make their outputs comparable.

Making recordings and evaluating and comparing the results in terms of pk-modulation was also part of the experiments. For the post processing of the recordings I used two different methods in NCH Wavepad.

 

Table 5: Description of post processing methods

 

Experiments with a yellow LED

A yellow LED is a very rough approach to sunlight since it’s spectrum is limited and does not cover ultraviolet frequencies.

I ran the LED with a current of 4 mA. This is a very practical value that gives a reasonable amount of light while keeping the heat loss in the LED low. Because the SSM2167 circuit imposes variable amplification and audio compression on the received signal, I tapped the signal right before this stage (Pin 5 of SSM2167) to ensure the amplification of the signal is stable. The noise signal was measured with the RMS function on my oscilloscope.

Here are the values I measured.

 

Table 6: Measurements with yellow LED

Then I made a recording of a 1 minute length of the noise signal. I could already hear the pk modulation as a faint voice burst on the noisy ground floor. 

 

Table 7: Recordings made with yellow LED

The results are showing a fairly strong pk-modulation but rather poor voice quality.

 

Experiments with a ultraviolet LED

A UV LED shows a much higher spectrum of frequencies compared to yellow LED. Basically ultraviolet light is higher in energy too.

To make the results comparable to the ones I gained from the yellow LED I measured the forward voltage across the LED and recalculated the LED current so that the power consumption of the UV-LED would be identically compared to the yellow LED.

Here are the values I measured.

 

Table 8: Measurements with UV-LED

 

You see that within some tolerance considerations the emitted noise signal is the same compared to the yellow LED

Then I made a recording of a 1 minute length of the noise signal with the UV-LED. My first impression was that it was not different from the yellow LED.

 

Table 9: Recordings made with UV-LED

 

Again the results are showing a fairly strong pk-modulation but rather poor voice quality.

My evaluation was that there is no substantial difference between the results obtained from a yellow and a ultraviolet LED. The logical conclusion is that the pk-modulation is not bound to the spectral composition of the light whether it is yellow, ultraviolet or sunlight from the sky.

 

Narrowing the focus

Another question that came up during my investigations was if the noise with this substantial amount of pk-modulation was a product of light at all. Phototransistors are producing noise not only from light shining on their substrate but also from any current that flows into the base lead of the transistor causing it to draw collector current.

That was easy to test. I disconnected the LED from the power supply and wired different resistors from the phototransistor base to the power supply starting from 680 K ohm up to 15 M ohm. There was almost no noise perceivable, especially not that quality of agile noise interspersed with cracks and bursts.

My conclusion was that for the pk-modulation to take place, the transistor needs light but of no special spectral composition. However I was aware that I did not take into account another crucial component, the SSM2167 circuit. Due to its non-linear behavior it imposes a substantial amount of transformation on the signal. I could not exclude that it could contribute to the observed effects.

In order to find an answer to this question I changed my experimental setup. According to my measurements the SSM2176 roughly added an amplification of 20 to the system. So, I forked the signal behind the preamplifier and routed it to the SSM2167 or another amplifier stage with an amplification of 20. Thus the resulting signal would always show the same level but one time processed by the SSM2167 and another time just amplified linearly without compression or noise gating.

 

Table 10: Recordings made with UV LED and with/without SSM2167

 

             

Fig.6: Signal without (left) and with (right) SSM1267

I think you can see that there is more modulation visible in the right image that shows the signal processed by the SSM2167. The sound characteristics of the recordings support this observation. The recording of the sample with SSM1267 involved contains some vast and abrupt level changes. These are due to adjustments I did on the potentiometers connected to the circuit and are not related to pk-modulation.

Obviously the non-linear behavior of the SSM1267 adds a substantial amount of pk-modulation to the signal while the question, if the processing this circuit does is amplifying the already present modulation or if the circuit itself is a door for pk-modulation itself, remains unanswered. Due to my experience every kind of signal transformation that affects the signal structure is a gate for pk-modulation.

 

Alternative post processing methods

So far the post processing methods I applied are standard methods from the signal enhancing software toolbox. One of the researchers in our Varanormal team developed a software that is based on AI algorithms and is able to outperform the classical denoising and filtering techniques under certain conditions. Because I already have the last version of this fantastic application installed I wanted to give it a try. In the following you can see the parameter settings I used.

Fig.7: Parameter settings for the machine learning algorithm

The parameters were carefully optimized by controlling the output by ear while always only changing one parameter. After reaching the optimum for every parameter the output level of the SkySound device was altered up and down to see if any more improvements could be made.

Basically I got a decoded signal that had all properties of the human voice especially in terms of rhythm. I really obtained just one continuously speaking voice instead of a bunch of parallel talking spirits like I got from earlier experiments.

Nevertheless the weird metrics of spirit voices remained . Often the pronunciation of syllables is unusual compared to human speech. Some phonemes are enlarged and other shorted unnaturally. I think this is due to the spectral material the spirits find in the signal entropy we give them to work with. They seem to try to put the right words in where these match the actual spectral composition and signal transitions they are observing.  However, very often the created vowels and consonants do not match the needed length to form normal speech and that is why the speech sounds so weird.

I extracted lots of samples I want to show here. Again you can find my interpretation of the messages in the annex.

 

Table 11: Audio samples extracted with machine learning algorithm

 

Final tests and new prototype

I did some more tests to support my theory about the origin of the pk-modulation. First I replaced the phototransistor with a light dependent resistor (LDR), a PTC (positive temperature coefficient resistor) and a CCR (carbon composition resistor). I used all these components in earlier ITC-experiments. The CCR showed a bit of pk-modulation but not as good as the phototransistor. Another important part of the circuit I identified to participate on the pk-effect is the self-adjusting transistor stage T2. It's original purpose is to adjust the receiver automatically with changing light conditions. Since working with an LED provides more or less constant light intensity there is theoretically no need for such a circuit. But for some reason it turned out that it adds-up substantially to the pk-effect. So I kept it.

At the end I optimized the usability of the SSM 2167 module. It worked very well by replacing the potentiometers for signal compression and noise gating by fix resistor values and do the adjustments only with the potentiometer to control the light intensity of the LED.

My findings were the base for a new prototype I made working with a phototransistor and a UV LED.

Fig.8: Breadboard layout of prototype

 

Fig.9: Working prototype

 

After making the breadboard layout and the final prototype I recognized they don’t behave identically. The finalized prototype showed large spikes with pk-modulation characteristics breaking through with high energy. They were literally bombshelling the noise gate of the SSM 2167 causing it to full open the gate at every spike that appeared like a small explosion. I could exclude statics and radio interference because the effect grew with the light intensity and at least appeared to me to have the same rhythm as the voices.

Sound example of the Prototype:

 

I processed this recording a bit with reverb and voice pitch. I think at least you should be able to identify a voice although it is so overdriven that you cannot understand it:

 

 

Conclusions

 

I think this paper is interesting because it does not show a linear and straightforward approach from an idea towards a realization. Instead you can see something that is very typical for the research work in ITC. You are starting with a certain idea or phenomenon to be investigated. While following this path by using scientific methods (experiments, documentation and conclusion) you finally see that the original question is not in your focus anymore. New questions are showing up and very quickly you are following a quest of a yet unknown goal. Someone else now is leading the path you are walking on and in the end you are given something that is not what you were looking for but maybe something even more precious.

I was looking for hidden modulations in the light from the sky but what I found was a combination of a noise source with an audio circuit that was designed for a totally different application. Working together they are creating the best quality of continuously speaking voices I ever was able to obtain.

Nevertheless there still is a chance that the light from the sky contains more magic than an ordinary LED may cause. At least I don't yet got a Stream4_13 event with a UV-diode. So maybe there is more to come.

For now, I just can say “Thank you” to the hereafter.

Annex

 

Table A1: Interpretation of audio samples in chapter “General observations”

 

Table A2: Interpretation of audio samples in chapter “Alternative post processing methods”

 

Great!! Thanks for this link. I love those movies. Gonna watch it next weekend.

 

Avast sent me an advertisement for their online privacy campaign. They are very concerned about my privacy!

In their message my email client blocked a spy tracker! Now you know why Avast is so concerned about my privacy.

 

Hello Sharon. Could you post your recording here? I have several methods to process it including slowing down.

You know I am frequently making ITC recordings in nature to gain voices from the natural sounds of water and wind but even more I am utilizing the magical properties of moving water in creeks or lakes to gain hereafter images from it.

My usual approach is making a short video sequence and then analyzing the file frame by frame. Thus the resulst are fixed images and this is working very well. This also was the case two days ago as I went to my usual place in the park beneath my house where a small creek is running through and I made a short video from it like I did so many times before.

This time something was different. As I watched the short film and I concentrated on the vibrating relections in the upper left quadrant of the film I got the impression I saw semi-transparent humanoid shapes running around at a very high speed and it appeared to me like I was watching into a different dimension populated by entities through a window.

 

Of course everything looked very distorted but the impression of seeing people running around was persistent. Thus I decided to change my standard operating procedure and take the video as a video and not as a source for single frames to analyze.

What I will show you now is highly speculative and likely 60% pareidolia and 40% pk-effect at best but maybe this pushes open a door to a technology where we could see scenes from the hereafter like on a movie screen some day buy using the magic of water.

The next thing I did was to crop the region of interest and to slow the video down to 20% of it's original frame rate. I think now you can see a little better that something is going on there.

Despite most parts of the video are showing random patterns there are some sequences where you can see coherent movements. I tried to separate the interesting parts from the trash and extracted the following scenes. I admit there are very hard to follow. See it as an interesting speculation.

Most of the following clips I made as animated gif because this is a very convenient format to show those little scenes.

 

The humanoid body

This clip shows the blurry and pulsating shape of a human torso with its front facing us and for a very small moment we can identify the right arm and shoulder.

 

The Animal

In the video I identified a strange structure looking like an animal torso on very thin legs. It appeared to me like a camel or some similar creature in front face. The strange thing is that it is coming from the right side and walking towards the humanoid body. You even can see some of his legs in motion.

 

The crowd

In the next scene you can see the very blurry shapes a humanoid beings interacting, like a crowd of people at some place in a city.

 

The punch

The following scene is highly speculative! It appeared to me as if the two persons visible on the right side of the previous scene were interacting with each other in a very special way at a different timestamp in the video. It seemed like the person on the left side punched the person on the right side into his face that just fell off.

 

In my mind the idea is forming to se an aparatus utilizing water flowing over a rough and dark structure like slate making the water vibrate and creating reflexions of some light source. Maybe one day we could take a look into another dimension like we were watching a movie in our TV sets.

 

 

 

 

8 hours ago, Arizona EVP said:

Happy New Year Mr. Ramos,

There is a Season 2 of skinwalker ranch available to watch at the history channel website:

https://www.history.com/shows/the-secret-of-skinwalker-ranch/season-2

 

Second season is pretty good.

 

Ron

 

A happy new year also for you Ron! 

Thank you for the link. I hoped so much for another season. Obviously you already saw it.

9 hours ago, Fernando Luis Cacciola Carballal said:

For what is worth I totally think that there is an essential form of energy which underlies all of the physical forms.

Now, I'm a bit surprised about Seth's statement regarding EM energy since I had always viewed EM as a "lesser", non-essential, too-physical form. But maybe it's more fundamental than I gave it "credit for", so to speak.

On the other hand, he might have meant something like.... "the subjective experience of any consciousness is automatically expressed, radiated, as a unit of purely fundamental energy WHICH generates (translates into) a unit of EM energy when that expression is targeted to this one physical world which just happens to have EM as the fundamental energy form.

In other words, I really don't imagine electromagnetic fields and waves existing in all the astral planes, specially those far away from matter (like the Angelic plane as some call it).

 

I agree with you Ron. Electromagnetic energy likely is something that is transformed from a higher quality when this quality enters our physical realm. I remember that Rudolf Steiner wrote something similar. He said that human thought is frozen electricity. That is pointing in the same direction.

9 hours ago, Fernando Luis Cacciola Carballal said:

Each time I read another excerpt of the Seth Material it's even better than the last one! I think it's time to read the whole book (or books, I think there are more than one right?)

The Biggelow story was quite fascinating! it makes sense but I didn't know that.

Yes Fernando. There are several books Mary Roberts channelled. My quotes were from the first one that was published in the 70s. But Mary also wrote books that focused on special thoughts. I remember one book covering the meaning of projections and dreams and another one written about the spiritual implications of pandemics (Hello Corona!).

Common Principles?

As part of my analytical mind I always try to find the working principles behind things I observe. As I already told, in the videos the investigation team frequently observed drained batteries in smartphones and other equipment they used for their measurements. Already in the 1st episode they witnessed an instant and total charge drain of their smartphone batteries while scrutinizing a cave. In another eposide the ground radar equipment suddenly shows a charge loss in  the batteries that were fully charged before. In a third incident a laser beam just got extinguished even though the batteries were still ok.

While scrutinizing the cave, one of the teams members, Travis Taylor (Astrophysicist) suddenly suffered from dizzines and exhaustion. His knees got weak, he started to trumble and went out of the cave. Outoside he told he felt drained as if his blood sugar has went down instantly.

What is the common principle behind these effects? Obviously it's energy drain! There seems to be a quality coming from another dimension that seems to affect energy in general. In our world energy has different facets. We see it as chemical enegry, electrical energy, potential energy (a mass pulled onto a certain height), dynamic energy (a mass in movement), magnetic energy, thermal energy and energy in biological metabolism. What if a quality coming from a higher levelled dimension can affect energy in general? What if "energy" on that level is oneness without those facets as we see it here? Could this be an explanation why "energy" in our world can be affected in all its appearances simultaneously?

 

I stumbled upon this by accident, which in my case always means that my spiritual guide pushed me towards it. I have an Amazon Prime subscription and I subscribed to the Prime History channel. There I saw an 8 episode series called "The secret of the Skinwalker Ranch" and I watched all of them. First I thought that it was the usual stuff about U.F.O's, ancient alien races, stargates and all that stuff. But these 8 episodes were really something that grabbed me.

1. ThePlace

The plot is an old farm located in the northeast of Utah in the so called UINTA basin. Until the end of the 18th century it was populated by the american native tribes of the Utes and Navajo. Later the Utes cooperated with the US army and with their contribution the Navajos were sold into slavery. It was said that the Navajo shamans cursed the land before they were deported. Later the place was farmed by several families, the Myers, the Arnolds and the Shermans.

2. Paranormal activities

It's a place with a long history of paranormal incidents (since 1906) like lights in  the sky U.F.O sightings, EMF anomalies, attacks from wolve-like creatures and cattle mutulation.

3. The story of the video

The series was filmed in 2019. A team of experts and scientist were invited by the current owner of the ranch, Brandon Fugal. He is a real estate investor and supports paranormal research. The footage that is generated by the team during summer 2019 shows amazing paranormal incidents.

• They measured beams going from the UINTA ridge directly into the sky only visible by using IR cameras.
• Several U.F.O. sightings in broad daylight.
• In one of the old houses they found a hollow, sealed concrete chamber containing ashes and bone fragments. It also was a place were haunting coming from could be observed. No one knows what this chamber was used for.
• By use of a ground radar they identified a large 1000 ft long football shaped object buried in the ground directly under a road that connects two of the old homested settlings.
• They frequently measured very high electromagnetic activities across the whole EM spectrum, especially in conjunction with U.F.O sightings. The biggest energy concentrations were found in the microwave range but they also got hit by gamma ray bursts.
• They identified an energy concentration 1.500m above the ranch. While trying to measure it by use of an instrument platform hooked to a weather ballon, the whole ballon and equipment just vanished after the meter readings went off scale. They repeated the experiment with instruments attached to rockets and could observe very high energy levels in the microwave and gamma ray spectrum in that specified level above the ranch.
• Batteries got depleted of energy in an instant
• Team members got headaches, dizziness, nausea, tissue detachments and burns from gamma rays.
• Livestock showed serious signs of stress, fear and confusion.
• Two Alpaquas were attacked and injured by a wolve like creature
• A cow died apparently from stress induced pneumonia.

4. Associations

I always feel amazed if I see or read something that triggers my memory so that sudden associations are showing up I wasn't aware of.

One thing that mesmerized me was that our well known Mr. Biggelow (yes, the one who payed a million dollar for the best afterlife essay) was the owner of the Skinwalker ranch from 1996 - 2016! He founded an institue named NIDS (National Institute of Discovery Science) and employed a team of experts, scientists and former FBI investigators to run an investigation program on the ranch. The Pentagon contributed to the researtch and co-founded it. In the end all results were classified and the NIDS was dissolved again by Biggelow. He sold the farm to Brandon Fugal in 2016 and told him, hew should be prepared to accept that something strange is going on there.

Another thing that triggered my memory was something I read in Mary Roberts book "Seth speaks!". Maybe you know Mary Roberts, she was a medium and Seth is a channeled, very high entity that spoke through her and helped her to write books in his name. In chapter 5 of the first part of the book, Seth tells about how thoughts are forming matter.  He tells something about crosspoints of dimensions were the interdimensional border is very fragile. He calls these "subordinate points"

Here comes a citation from this chapter:

"Briefly, in your own country, the West Coast, portions of the East Coast, Utah, the Great Lakes, the Chicago area, the Minneapolis area, and some other southwestern areas, are in those neighborhoods of excellent coordinate activity, for the reasons given. Materialization will quickly appear, and potentials therefore for both constructive and destructive elements are high."

You see Seth clearly mentioned Utah? I think this is amazing. I want to cite other paragraphs were Seth tells more about the activity coming from the subordinate points. I will put this in the following quates.

"Give us a moment. These coordinate points themselves activate the behavior of atoms and molecules as, say for example, the sun aids the growth of plants. The coordinates activate the generating behavior of atoms and molecules, and greatly encourage their cooperative abilities; their tendency to swarm, so to speak, into organizations and structural groupings. The coordinate points magnify or intensify the behavior, the latent spontaneity inherent within the properties of physical matter. They act as psychic generators, propelling what is not yet physical into physical form."

"These points are not recognized as such, but they are points of what you could call double reality, containing great energy potential; coordinate points, indeed, where realities merge. There are main coordinate points, pure mathematically, sources of fantastic energy, and subordinate coordinate points, vast in number."

"Now: This is highly simplified, but the subjective experience of any consciousness is automatically expressed as electromagnetic energy units. These exist “beneath” the range of physical matter. They are, if you prefer, incipient particles that have not yet emerged into matter."

Roberts, Jane. Seth Speaks: The Eternal Validity of the Soul (A Seth Book) (S.82). Amber-Allen Publishing. Kindle-Version.

As you can read Seth also clearly states that the described affects are also comprising electromagnetic energy!

 

 

 

23 hours ago, sglanz said:

Nice idea, and great discussion! I remember seeing ITC images of spirit technicians working at "computers" to collaborate with our side. These spirit computers are the intermediaries. Thus, the speaker would not have to learn this new language. The other-side computer would effect the digital-to-analog translation. 

But this presents a problem. The average person on the other side might not have access to this specialized translational etheric hardware. Unless it is so successful that it is mass produced and everyone has access. I'm not sure how that is done on the other side. I suspect it's not the same way we replicate things on this side. 

It would be better if all they had to do is speak, with all the translation done on our side. 

A very smart thought Steve! It raises the question how the hereafter is organized and socially structured and what their techniques are all about. Regarding the potential of realization of such a technique on our side I refer to the experiments of Harsch-Fischbach in the 80s where pk-effects were observed in floppy disks and computer text. Thus it is possible principally.

10 minutes ago, Karyn said:

The YouTube does not appear to have categories so for instance I had to scroll through a lot before finding his next one.

I personally think like with like.  Happy to help out if you want them brought across.

Thank you so much Karyn. You're the good spirit in this forum! 

1 hour ago, Karyn said:

Marie may be able to step in here Andres as Keith was training us with YT.  Took me five minutes to work out YT.  Ask her about tagging as I would have to dive under three weeks worth of paper to find my notes and her brain will be spot on.

Dr Parsons of course will come under Dr Keith Parsons.  As Keith knows what we have on the channel listed and unlisted he maybe the first port of call.  I am deliberately keeping clear of him this week to give him the opportunity to do a few things he had to do and finalise his situation and then was going to be  on his tail next week.

I will have a look on our channel and see what they are falling into now.  But I suggest make contact with the above in the meantime.

Thank you Karyn. I will reach out for Marie now.

I have a question about the way we want to deal with videos we are using for promotion. As far as I see most people are sharing videos they found in the respective category in the "Newsletter&Social Media Submissions" forum. But what is about videos we deliberately made ourselves and branded with "Varanormal"? 

I already made some of these and my standard procedure so far was that I had put them in my private YT channel which is NOT related to ITC as unlisted videos and then shared the link with some persons. However we do have an official YT channel and I would like to know how the procedure is to make a video being published there.

I remember Alberto plays a role here and providing this is so I would like to know if there is a standardized way how to send the video to Alberto (Cloud service e.g.) including the description and the information about video tags?

I would not like to have the video in my channel because it is not ITC related.

On 12/11/2021 at 8:47 PM, Fernando Luis Cacciola Carballal said:

WOW. That clip sounds a lot like a morse-like transmission. I'll analyze with my code later this weekend to see what do I found.

I started looking for some SETI-made software we can use for ITC. I'll ley you know what I find.

Due to my recherche the SETI software is no longer maintaines and it worked by downloading pre-formatted radio-astronomy data from a fileserver. Thus it will not be suitable for analyzing audio data I guess.

15 hours ago, Fernando Luis Cacciola Carballal said:

Hi Andres,

One of the things that I've been considering is that, as you said, speech is the more natural form of communication for them. When developing this I used the "shout over the noisy telephone line" as an guide. 

What that means is that they could, on the one hand, still speak to us as they normally do, but, on the other hand, encode binary information in their speech. Sort of a if I said out loud zero, one, zero with my voice. Except that this is too naive. All we need is two well distinguishable symbols. 

So in a way, TWAK as I described above, is more of a particular technique out of a general strategy, which is to get them to send us binary data, not spoken words, BUT, in whatever way it is the most natural to them. 

From that point of view of this generalization, the strategy is to have them influence the noise with whatever that can be distinguished from the noise and can be distinctively classified in two separate groups (the zeros and the ones).

Two different amplitudes is one such distinction.
But the length of the "non-noise" segments can be another. 

Going back to the noise phone, I could try something like "oh" or "oooooooh"
Basically, a kind of a morse code in terms of a dot and a dash and a gap, except that the actual code is binary, dots are zero, dashes are one.

 

 

I am experimenting with a NE55 chaos circuit. It provides almost endless parameter settings. In one of those I got a sequence that sounds like morse code. However if you listen carefully you can hear it is speech with a certain pronounciation. This is proving your theory that they basically can produce digital signals by shouting.

Here is a sample:

 

Then I got another idea after you posted the SETI paper. Isn't there already free SETI analyzing softare available for PC's? I remember that the SETI organization provides this for collaborative and distributive analysis of radio astronomy data. Has anyone evr thought about using this for ITC?

Consider that we could beat the sientists with their own weapons if we use a tool developed by scientists to prove the survival after death. Would be hard for them to turn down our evidences then, harhar!

This is great Fernando! It is obvious that the problem context of SETI is the same we are facing. So, do you already have an idea how to start?

This is extremely impressing Fernando! I like your integrative approach taking into account all of our previous researches.

Here are my reflections on your ideas. Due to my investigations spirits can control time and energy but not in any case. I observed time variant impulses with strong amplitudes like binary signals and pk signals with varying amplitudes. The question what way is more favorable is depending on the technology. Coherer based signals e.g. have high energy but due to the intrinsic avalanche effect they don't produce well distinguishable amplitude levels. Thus they're better for time controlled impulses.

Other more linear ITC methods generally are suffering from bad signal to noise ratio. The TWAK is overlayed by non pk noise. Basically this accouts the same for time encoded signals as well. Thus both methods are promising the same way I guess.

However the most crucial factor certainly is training for the spirits. Their natural communication form is speech. If we want them to produce digital rather than analog signals they need feedback of their outcomes.

So in my eyes we should make a decision for the most simple realization and then let it run for a very long time while scanning the output for something that would be a strong functional proof like the reception of your name 'Fernando' e.g. Your sw could scan the output automatically with ease I guess.

Your thoughts gave me the idea to make those pictures more popular by using another method. So I decided to make a video from it.

This video is just the intro but gives you an overview about my intentions.

 

It's a low resolution export to save storage space. The original will be of better quality.

 

Wow Chris, I definitely can confirm this! Especially the human face in the middle of the last picture you discovered.

The strange thing is that the pictures are composed in a very strange way. You can recombine the elements to new objects, faces and persons. Isn't it strange that this visual representation offers the viewer the same degree of personal perception as we are used to from audio transcommunication?