Andres Ramos

Hello Andrea. What you described is very common. I would like to generalize what you said if you allow me. 

Due to my experienced spirit voices manifest if an audio signal goes through a substantial structural change. Now this is a bit complicated to grasp but I will try to give you an example. If you change the volume of a signal it becomes lower or louder but the characteristic stays the same. It doesn't sound different.

Now imagine the signal becomes overdriven or clipped. You will experience then that it sounds different, the characteristic has changed. That is exactly the point where spirits get their foot into the door frame.

Krisp is an artificial intelligence algorithm that tries to guess the most likely interpretation from a distorted signal -in your case the mumbling crowd at the video meeting. So this way, Krisp can be seen as a transformation that changes a signal dramatically itself. Moreover the results from Krisp are clear voices what makes it even more impressive.

Keith and I did some experience in the past with Krisp and it gave very good results but these merely independent from the input Krisp was processing. So Krisp itsel was the door for the spirits.

Nevertheless the results regarding the contents were very earthbound so to speak. They seemed to come from a rather low dimension. For this reason I abandoned the use of Krisp.

I never knew you Mr. Bacci. You already have passed away before I started my quest for the afterlife. Although I learned you were and still are one of the lighthouses that are throwing their beam of light through the dimensions hoping for everyone who raises his head to see the light.

Nothing you did will be forgotten by us and nothing you are doing now will be forgotten either.

Heute habe ich das Glaskugel Experiment mit dem Zimmerbrunnen wiederholt aber ohne die Glaskugel. Ich habe nur das ausströmende Wasser gefilmt.

Die Formen sind wahnsinnig lebendig und detailreich.

Very good points Karyn! It's noted 

Ich möchte nochmal versuchen euren Input zu meiner Frage von oben zu bekommen. Welche Daten würdet ihr bei der Protokollierung einer Einspielung dokumentieren wollen?

Danke für diesen echt coolen Beitrag, Michael! Ich kann die in dem Artikel beschriebenen Bedingungen voll bestätigen. Der Hohlkörper ist wichtig damit dem menschlichen Stimmbild entsprechende Resonanzen entstehen. Wasser ist als Medium extrem agil. Die Tropfen die wieder ins Wasser fallen formen darin selbst kurzfristig einen Hohlraum, der sich schnell wieder abbaut. Dadurch entstehen kurze Frequenzen 'Sweeps' welche die Ausformung von Lauten begünstigen. Auch der Abstand zum Mikrofon ist wichtig damit eine gewisse Unschärfe entsteht, also eine Abschwächung des Originalgeräusches um der Stimmbildung der Spirits Raum zu geben.

Wasser ist grundsätzlich ein tolles Medium, auch für Bilder.

1 hour ago, Rosamina said:

Danke Michael,

ich hatte über ein anderes Einspielmedium angefragt, wie ich am besten mit der Gruppe Zeitstrom Kontakt aufnehmen könnte. Da wurde mir gesagt, mit dem Radio und Wasser. Mal sehen, wie ich das am besten umsetzen kann. Das wird wohl auch den Hinweis sein, ein "normales Radio" zu benutzen, wie Du schon geschrieben hast.
Es ist echt sehr schwierig auf der angegebenen Frequenz abzuhören.

LG Rosamina

Ich habe es auch versucht. Tatsächlich ist mir nicht ganz klar ob die Frequenz 87.5 MHZ oder 87,27MHz ist.  Salvi hat was anderes geschrieben als Michael. Ich habe beides am Sonntag probiert allerdings bisher ohne Ergebnis. Bei 87.5MHz kam leise ein Radiosender mit durch was ein Vor- oder auch Nachteil sein kann. Ich will versuchen jeden Sonntag eine kurze Einspielung zu machen. 

On 8/24/2022 at 5:41 PM, Michael Brandel said:

 

 

 

Die Spirit Gruppe Zeitstrom ist wieder aktiv!

 

Wir sollen die Frequenz 87,27 kHz nutzen.

Dies ist die ehemalige Eurosignal Frequenz.

Mit dem http://websdr.ewi.utwente.nl:

unter FM und noise reduction tätigen.

Aufnahmemöglichkeiten bietet die Webseite direkt an,

die als mp3 auf dem PC abgespeichert wird.

 

Achtung: Ihr werdet sie erst sprechen hören,

wenn ihr dauerhaft in dieser Frequenz den Kontakt sucht,

ansonsten macht es für die Spirit Gruppe keinen Sinn mit euch zu arbeiten!

Ich wünsche euch viel Glück.

Insights ansehen

Beitragsreichweite: 0

 

G

Danke Michael!! Das ist eine extrem wichtige Information! Ich hab auch schon eine Idee wir ich das machen werde....

On 8/25/2022 at 4:44 PM, Transkomm said:

Ciao Michael

Nur eine kleine, aber wichtige Korrektur:
Bei der Frequenz der Eurosignalbrücke hat sich einen Fehler eingeschlichen.

Die Frequenz ist 87.5 MHz und nicht kHz. Das macht doch noch einen grossen Unterschied

Ciao ciao

Salvi
 

Ist ja bloß Faktor 1000!

Die folgenden Bilder sind entstanden durch das Abfilmen einer Glaskugel, die auf dem Wasserauslass eines Zimmerbrunnen rotierte. Die Kugel wurde von im Brunnen verbauten orangen LEDs angeleuchtet.

Daa Video wurde danach in Einzelbilder zerlegt und analysiert. Die Bilder sind leider unscharf. Ich arbeite aber an besseren Bildern.

Ok

Ich habe noch ein Nebenbeiprojekt laufen um ITK Einspielungen zu protokollieren. Es wird ein ausfüllbares PDF Formular was man abspeichern oder ausdrucken kann mit Textfeldern, Auswahlboxen, Ankreuzfeldern usw.

Mich würde interessieren was ihr meint welche Daten erfasst werden sollten. Meine Ideen sind bisher

Datum, Uhrzeit, Stimmung, Wetter, Mondphase, Dateinamen der Audios, interpretierte Inhalte, Name der Experimentators, weitere anwesende Personen, erkannte Wesenheit (Name),...

4 hours ago, Karyn said:

No 2, no 3, no 7 I can pick some words.

 

I actually heard some English  in 4 quite strongly and distinct...

 

while some of the language in 8 is unknown to me there does appear to be distinct voices (what I hear only small part in English is "and I am making some..."

Is "8" the last audio clip in your counting?

Als mein Schwiegervater in einem Pflegeheim verstorben sind wir am gleichen Tag hingefahren um Abschied zu nehmen. Ich habe meinen Digitalrecorder mitgenommen und die seltene Gelegenheit genutzt um die Stimmen aufzuzeichnen die sich nach dem Tod eines Menschen manifestieren. Ich stelle die Aufnahmen einfach so vor wie sie sind, ohne meine Interpretation. Bei manchen Aufnahmen ist das Original am Anfang und die nachbearbeitete Version nach einer Trennungspause am Ende.

Hochinteressant Rosamina!

Rückwärts abgespielt höre ich von hinten beginnend,

"Oder unten rum"

Undeutlich

Undeutlich 

"Heute ein Flur "

"Sie hat weiße Windel"

"Ich will dich ernennen"

"Siehst dick Männer"

Ja natürlich Rosamina. Hier ist alles öffentlich! Sehr schön, dass du darauf hingewiesen hast, dass man die Nachrichten immer vorwärts- und rückwärts hören kann. Das Ergebnis ist übrigens außerordentlich deutlich!

Danke Gitta für diesen Beitrag!

Ein interessantes Statement. Und es stimmt. Pflegeheime sind Sterbeanstalten in der ein sinnlos gewordenes Leben auf maximale Länge ausgedehnt wird um maximal viel Geld zu verdienen.

Das hier ist etwas persönlich. Vor etwa eineinhalb Jahren verstarb der Vater meiner Frau in einem Pflegeheim in Rostock an Altersschwäche und diversen damit zusammenhängenden Krankheiten. Wir sind damals hingefahren um Abschied zu nehmen. Ich habe heimlich meinen Digitalrecorder mitgenommen weil ich ahnte das Geister anwesend sein würden.

Tatsächlich nahm ich einige Stimmen auf. Eine davon war sehr leise und flüsterte etwas, dass sich wie "Ein Mord" anhörte. Möglicherweise irre ich mich aber auch. Hier ist das Audio. Am Anfang ist das unbearbeitete Original und nach einer Pause das entrauschte Signal.

9 minutes ago, Rosamina said:

Hallo Andrés,

vielen Dank für das nette Kompliment
Gerne werde ich einmal meine Methoden im Forum aufschreiben, wobei diese recht simpel sind. Die Wesen kommen ja mittlerweile über alle Geräte. 

LG
Rosamina

Das stimmt tatsächlich. Die Geräte sind wahrscheinlich wie Katalysatoren aber die Energie kommt von uns selbst.

Hallo Rosamina! Ich freue mich riesig, dass dich dein langer Weg endlich hierher geführt hat! Ich glaube wir können viel voneinander lernen. Du hast ja viele Jahre Erfahrungen mit Einspielungen. Vielleicht magst du deine Methoden beizeiten im Subforum zu Methoden mal beschreiben.

Übrigens die von dir gepostete Spirit Nachricht kann ich bestätigen!

A message to anyone who waits to get an InClip. Today I finalized the layout for professional PCBs (Printed circuit boards) for the electronic. The boards will be delivered in some weeks. Then I can start to populate the boards. In the meantime I hope to find a cheap and ruggedized casing.

1 hour ago, ALF said:

Is this a psychological test?!  In the first picture I see an animal-like head with eyes, ears, black nose, open mouth with teeth.  In the next few it looks like it's going through a decomposing process.  In  picture #5, besides the face with the open mouth, sticking out its tongue, I see 2 faces at the top.  The face on the right looks a lot like your avatar Andres!  Ever changing faces.  My favorite is #6.  It just looks like a sweet entity I wouldn't mind staring back at me from the fountain.  Some of the Black & White ones are a little disturbing...

Did I pass?

 

Yeah, you're in!

Thank you so much Andrea. It's good to have someone taking her time to go thoroughly through all those images. I can confirm what you saw apart from my Avatar that I could not find but I think you might see more and better than me. For me lots of these images appeared to me like baby faces. This might be due to the round structure defined by the ball.

0. Abstract

I did some scrying experiments in the past even I did not know the exact meaning of "scrying" yet. It was a photo of the surface of a lake where I got my first visual ITC images from and they put me on the track I am still driving on.

Fig.1: ITC Water image "The bearded man wearing a poncho"

Although my main quest was upon EVP's I frequently came back to visit the awe and magic of images in water as I did for example in my article "The magicians chamber" you can find here.

My latest approach in this field was an experiment with a rotating glass ball on the stream of an indoor fountain. It gave me some very impressing results like this picture here.

Fig.2: A face

A video from this first experiment with a rotating glass ball will be published in the VARANORMAL YT channel soon. It is full of structures, persons, symbols, topology, buildings a.s.o.

1. The mechanical design

I am creating my designs from a purely phenomenological point of view on ITC. I take what was given to me as knowledge and experience but I cannot explain why it works. Most of this comes out of intuition. So I was pondering how to utilize the underlying principles I discovered in my experiment. I decided to create a device that would work as closely to the setup I had tested with the glass ball as possible. As always my intuition gave me a stream of construction details for this device and it was more or less already elaborated before I picked up the first screw.

Fig.3: The first working prototype

I had a nice wooden case that I took from another ITC device that proved not to work very well. Usually I cannibalize those old designs to save money time und unnecessary waste.

The base of the design is a motor with a shaft covered with foam and surrounded by a set of 4 orange color LED's as you can see in the following image.

Fig.4: Motor shaft and LED's

As you can see also there is a circular shaped cutout in the middle of the case lid. It takes in the heart of the device, a ball made of rock crystal with a diameter of 45mm. In its position the ball can be set into rotation by the motor and also illuminated by the LED's.

I designed two electronic components that I will describe in the following chapter. For now you can see the inside of the device in the following picture.

Fig.5: View on the inside

2. The electronic components

I designed two electronic components. The first one I made because I knew I would need something to control the speed of the motor. I realized a simple pulse width modulation with the famous NE555 timer circuit.

Fig.6: The motor control unit.

The potentiometer R4 sets the PWM duty cycle and so controls the amount of energy applied at the motor. A nice side effect was that the motor generated a sound that partially mimicked human speech. Maybe this will be a spin-off for another EVP device. I will keep you posted on that.

The second unit I created was just an adaption of a previous design. You maybe know that I created the SpiCa unit months ago. An electronic circuit based on the NE555 that creates very complex chaotic patterns. As I thought about the scrying device I immediatly came upon using this circuit for driving the LED's with that complex pattern. I felt very strongly that this flickering pattern in conjunction with the rotating ball would interfere with the shutter frequency of a digital camera filming the ball.

Fig.7: The SpiCa control unit

To facilitate my test runs I employed a DIL switch to make the divided output of the SpiCa signal selectable and thus looking for the most interesting interference patterns. Currently I run the device with S2 closed and all other switches opened.

4. Test results

I did some pre-tests where I found some flaws that needed fixing. Sadly the motor shaft was running with a substantial amount of eccentricity making the ball jump up and down. In the first design I had used a piece of rubber tube around the shat to give it more friction and making the ball rotating. I replaced it by foam that was dampening the eccentricity sufficiently. Still the ball makes a lot of noise while rotating but I expected this.

From my first tests I got a lot of pictures like this.

Fig.8: Test picture looking like planet Jupiter

It was this impression that made me name the device after the biggest of all planets. The "Jupiter" scrying device was born.

The first test I made with the digital camera mounted on a small tripod. The digicam had a macro lens to improve the images. I took a short video of the running ball while playing with the speed and the SpiCa patterns. Later I split the video into single frames in my NCH Videopad program and went through them bit by bit.

Fig.9: Jupiter device video sequence

In the video you can see some amazing details. i just played with the SpiCa pattern adjust and you can see light pumping effects and that the rotating direction of the ball seems to jump between clockwise and counter-clockwise forth and back. This is a result of the interference between shutter freuqwncy of the camera and the SpiCa patterns.

I quickly realized that the camera position should be fixed to improve the images that had to be taken with manual focus and aperture setting because otherwise the autofocus algorithm would go crazy by trying to focus on the rotating ball.

Then I got the idea to reactivate my old Samsung smartphone, installed a manual focus camera app and created a kind of table that could be attached to the Jupiter device like shown in the next image.

Fig.9: Attachment with smartphone on it

Fig.10: Look under the table attachment

As you can see the camera lens is located directly above the rotating ball and thus is in the optimized position to take pictures. In the follwing you can see a gallery of some images I gained from the movie I made. Sadly I had set the camera to low resolution and the pictures are lacking sharpness. In the next experiment I will take a HDR video.

What is also worth mentioning is that my theory of the SpiCa patterns interfering with the shutter frequency of the camera proved right. The resulting were dark zones in the ball like this one here.

Fig.10: Dark zones caused by interference

Now here the examples are coming.

Fig.11: A face in the upper left area

Fig.12: A dark face hovering in empty space

Fig.13: More faces

Fig.14: A light pyramide

Fig.15: Deep space with a dark face

Fig.16: A rectangular structure like a building in the upper area

Fig.17: Multiple faces in overlay

Fig.18: The face again from the beginning

Fig.19: More faces

Fig.17: A black hole in deep space

Fig.17: Moon face

5. Conclusion

I think it is obvious that this construction has some potential. For me it was important to prove that the scrying results could also be obtained without the use of water. Actually I think that the inclusions in the quartz ball are playing a mayor role in the image creation process because they are points of light precipitation. However I would like to conduct a comparitative test with a clear glass ball to be sure.

A video from Jupiter device will be published soon at VARANORMAL YT channel. The results of the ongoing experiments will be published here: https://www.varanormal.com/forums/forum/60-visual-photography-anomalies/

Sehr gute Ergebnisse Michael! Sind Informationen zur 'Occulta' auf der Raudive.de Seite zu finden?