Michael Lee

Yes. I assume it's the point where the current is in between saturation and zero.

Although I don't know if it's that good of an ITC entropy / noise source, I think it is pretty cool that we can actually hear the flow of photons from a laser or flashlight.

• Simply make a circuit of 48V (phantom power) -> 10K resistor -> PhotoTransistor (PT) -> Gnd (audio interface output). I use a BPW85A (purchaseable from Mouser for ~$1 each)
• Turn off all the lights
• Take a continuous light source (either a bright flashlight or pen laser) and point it at the PT face. Then slowly turn it away. You should hear a click sound as the voltage goes from high to near zero.
• Then, carefully adjust the light until you're getting lots of clicks. You should hear what sounds like pink or white noise if you get it just right.
• I think this noise is a stream photons hitting the phototransistor and generating a current that is neither saturated or not registering.
• This noise can be "filtered" with denoising, etc. to obtain spirit voice, but as I said at the outset, I don't think it's the most productive medium for spirit voices, likely because it stems from the noisy circuitry of the light source.
• One could imagine fancier light fields with mirrors, more than one light source, absorbent materials, water, smoke, etc.

The corona noise is a decent source for ML input but nothing extraordinary. It could have a quantum component due to reflectance/transmittance of the laser lens, but it could also have a noise component due to the driver, which is commonly considered to be more classical electrical noise (however, that's up for debate!).

I had a delicate setup with two PDs at 90 degree angles of a beam splitter, that also yielded voices in ML.

Maybe we could develop a "pocket" vibrometer for ITC/non-ITC use? It could be a better microphone in terms of sensitivity and locality. I was even imagining using something like guitar strings as vocal cords where the laser could pick the near still vibrations. A parabolic mirror could be used to ensure all the rays return back to the PD.

Two more things Ive observed today. 

The laser shot sound is known as laser doppler. It is a type of interferometry where the beam reflects back on itself, yielding the ridge patterns, that with movement of the reflective material, creates a fast washboard effect. 

It is most easily achieved by shining the laser directly into the phototransistor and lightly wiggling the laser.

The other thing I noticed is that my pen laser has an incoherent corona around the beam, that I can hear by pointing the beam just off center from any direction to the phototransistor. Its a mix of pink and white noise. It may be a good source of spirit voice, but I need to amplify it more, so we'll see.

To add, my blog is slowly walking through the noise conversion methods in my software. Simply put, I can turn anything into voice-like sounds. Now we have to listen closely and try to understand what they are saying and see if they are giving us advice on how to proceed.

Andres: I've set up a system that makes yours look like a final product .

A few quick notes:

• I think one of the explanations for some of the sounds we're hearing is laser vibrometry. The idea is that the minutest of vibrations, displacements, and temperature changes have large effects on the intensities and interferences that are then audible. Different materials have different reflectances, vibrational modes, and temperature-based motions. Imagine for example shining a laser on a vibrating string.
• I'm able to almost tune in the laser shot sound but have no idea what it actually is coming from.
• From what I've read, the lower the power for a given laser, the higher the ratio of quantum to classical noise.

Fernando - Thanks for the well-thought answer and video. With a little video editing, you could become the next great Youtube star .

I like your theory about how being too spiritual can lead to mind control abuses. My theory is that the Earth system is run by someone who thinks the best way to educate souls is to keep them in the dark while they're here. It's not something every Soul agrees with, but those that agree to incarnate Here were willing to make that sacrifice.

I agree though that when and if we turn on the light switch, it's going to be "upsetting" to just about everyone. Perhaps, we will do our best not to advertise too much, but I imagine the phenomenon will quickly become bigger than us, so the only thing we're choosing now is to be curious  and try to open the Pandora's box. One way or another, it's going to happen, not just because people like us are mixing our spiritual interest and technology, but as science digs deeper, the more it sees Reality, or more aptly, the illusion of this reality.

The particular problem they were discussing in my vision, was "wreaking havoc" in the timeline. The idea was that spirits were sharing predictions with us (in the physical) from their "future prediction" technology, like lottery numbers, which, in turn, invalidate this prediction technology or lead to instabilities. I agree that there's also plenty of legal issues, too. We need an ITC lawyer  

I guess my point was that "water lens" whatever that entailed, was a relatively harmless technique compared to some more sophisticated setups.

Of course, if I bet money on every "vision" I've had, I'd be in the poor house. 

It was a lucid dream, possibly a spirit world vision. I was in the future reflecting on our ITC discoveries that had transformed the world to some extent. I heard that the water lens method was popular, but audio ITC was "blocked" because it was causing too much confusion in the timelines. Something about too many people winning the lottery.

Once again this reminds me of the vision I had where people were using the so-called "water lens" method. For now, a clever microscope with "blinding" results.

Was someone running the microwave? I believe that most major phase changes like this one can be explained by physical reasons that we are just not aware of. However, each of these phases offers clues and provide aspects that spirits can manipulate. In addition different phases may resonate with different spirit groups. For example, one phase might be more suitable to an astral group, another with a heaven group.

There's always a mix of young and old souls in a civilization. So, it becomes a little like the freezing event in supercritical water, at what point does the sudden phase change occur? 

144K reminds me of the number in the bible for the amount of Jews necessary in Israel to bring about the end of the world.

I agree that it could well be fear-based beings, in part, that desire to hold our civilization back from its "phase change."

While individual soul development takes time and I respect that, there comes a point where the planet starts getting overwhelmed and needs more enlightened inhabitants to restore balance and health.

Recently, I was able to make some improvements in my ITC audio technology that has increased my reception considerably. I now can hear that a debate is going on in the spirit world.

Is humanity ready for new technologies that improve our contact with spirit? 

I feel like most of us in this forum, both currently and in the future, are "ready" for this tech, because we are seekers, and more awareness is what we wanted in the lifetime.

The rest of the world, which is the other 99.999999% may not be so open, pleased, or responsible.

What do you think? 

Our code was written in Python. Their original codes were written in Matlab .

Video / optical surveillance would be a new twist. I actually have a paper where we use some image change detection algorithms to discern otherwise invisible vibrations. The original work from MIT can be found googling "extracting audio from visual information" 

Nature ITC is where it all began with Friedrich Juergenson. Wind is a good turbulence/entropy generator.

Wow! That makes perfect sense to me, as I had a similar connection when my dad and brother passed. What you may find is there is more than one fragment of your dad floating around. Work with each one letting them know they are loved, and to look for help.

It sounds like you have some "out of towners". You might want to let them know you're not running a ScareBnB.

I have a few filters for "raspy" voices that we could try. Send me some raw samples. Also, the similarity to my spinning top visions is eerie. 

I use Python 3 these days exclusively because of better compatibility with certain modules I use. I'm glad you are making use of what Ive written so far. Some day ppl will look back at the beginnings of the physical link to the spirit internet.

The post that I shared the executable and more importantly, the Python script is here for Spirit Soccer.

As far as simple ways to test different modulation schemes, I'm going to refer back to my Spirit Soccer program. It allows spirit to pilot a ball into a target, moving it in one of four directions, or not moving it all. If they can see the computer screen, they can see how their energies affect the decision process.

The code can be modified for any modulation scheme that can express 4 symbols. 

In my current modulation scheme, which requires synchronization:

It samples "events" every 1/16th of a second. 

Every 1/4 second, there are 5 options: up, down, left, right, and do nothing.

If the total energy within one 1/16th second event is much greater than the three others, then it chooses that event, e.g., "up."

If none of the four 1/16 second intervals are anomalous or larger than the others, then nothing happens in that 1/4 second.

The threshold for determining whether one event "wins" is of course set by the user.

Ok, what you have, I think, is a three-state detector. 0, 1, and nothing. This is a great idea!

Let's say:

Values near zero (nulls) are state #1

Outlier values (peaks) are state #2

Everything else is state #3

Just need to decide how (#1, #2, #3) match to (on , off, nothing) 

Now I don't know how to group samples within a state. Typically, I make fixed duration groups.

For example, look at first N samples, decide state #1, #2, or #3.

Look at next N samples, decide. Etc.

If we only had two states, we would be forced to either make them 0,1 or 0,nothing.

0,1 would force spirits to be synchronous.

0,nothing would be very inefficient - a unary number system

Having three states gives us asynchronization and binary!

I don't completely understand your spirit impulse keying method yet. Maybe you can explain again.

I've been using pulse position modulation with a user-selected threshold. My source signals are typically white noise with Gaussian distributions.

I imagine that you are trying to observe "state changes" whenever they occur, and then decide 0 or 1?